ACS350 SERIES

SKU: ABB : ACS350 Categories:

ABB ACS350 - 5.5kW 400V 3ph - AC Inverter Drive Speed Controller with Keypad :

ABB ACS350 AC Frequency Inverter and simple Keypad for 5.5kW (7.5HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 12.5A.  Simple to set-up with 400V three phase input for a standard AC Induction motor.

R3 Size - 169mm Wide x 169mm Deep x 202mm high (plus cable clamp plate at 34mm) IP20 case.

Overload - 150% x 60seconds.
Speed Control Range - 0/500Hz.

Braking - To 50 Ohm minimum external resistor (not supplied) - use the ’Which Resistor’ button on this page.

Features - Basic Keypad, 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via ’Flashdrop’.

Input Current - 18.8A.
Input Voltage - 380 to 480V three phase +-10% at 50/60Hz.

Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 130W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.

Powered by Froala Editor

TYPE : ACS350 SERIES
APPLICABLE MOTOR (KW) : 0.37KW-22KW
APPLICABLE MOTOR (HP) : 0.5HP-30HP
OUTPUT VOLTAGE : 380V. 3PH
EN_ACS350_Generalmachinerydrives_catalog_REVG.pdf
EN-ACS350_UM_A.pdf
×

Request a Quote


Contact Info

Phone number

02-138-3976-77

Email address

sales@invtmasterdrive.com

Address info

เลขที่ 399/1 ม.13 ซ.กิ่งแก้ว 25/1 ถ.กิ่งแก้ว ต.ราชาเทวะ อ.บางพลี จ.สมุทรปราการ 10540